MTN6810-0102 Schneider SpaceLogic KNX Universal Dimming Extension REG-K/2×230/350W

MTN6810-0102 Dimmer actuator Description：

The SpaceLogic KNX Universal Dimming Extension is a dimming actuator that extends the channels of a SpaceLogic KNX Universal Dimming Master.
For independent control of up to 2 dimmable loads such as dimmable LED lamps, incandescent lamps, HV halogen lamps, LV halogen lamps using dimmable wound transformers or electronic transformers or dimmable compact fluorescent lamps.
(leading and trailing-edge phases)
The ETS programming is carried out in the ETS application of the Master. The Master controls the function of the Extension, the power supply and and communication to the KNX bus.
Channel status is displayed via LEDs on the Master’s keypad.
With screw terminals, short-circuit, open circuit and excess temperature protection with soft start lamp start. Different phases can be connected.
All outputs can be operated manually using push-buttons of the Master (On/Off, Dimm UP/Down, LED mode/Automode, One/Two button operation).
A green LED indicates readiness for operation, a red manual operation LED shows whether the Extension is controlled manually. For installation on DIN rails TH35 according to EN 60715. The connction to the Master or another Extension is made either with a Module Link or with a Cable Link.

MTN6810-0102 Dimmer actuator functions:

Dimming operation by KNX, dimming operation by manual switch, enable/disable manual mode by bus, automatic dimming operating mode or special leading edge phase for RL LED mode, various dimming curves and dimming rates, same dimming time, minimum/maximum dimming value, starting behaviour, 50% brightness when starting ESL/CFL lamp, dimming/value object switches channel, ON/OFF delay, staircase lighting
function (with/without manual OFF function, non-/retriggerable, prewarning function), scenes (up to 16 internally stored brightness values can be retrieved), priority control, disable function (behaviour of locking), status feedback (switching state, brightness value, fault), behaviour on bus voltage recovery/download.

MTN6810-0102 Specifications：

Supply voltage: via link interface
Dimmer type: 3-wire, RC mode, RL mode, RL LED mode
Power dissipation: < 6 W
Dimmer Outputs
Channels: 2 (different phases possible)
Nominal voltage: AC 110 – 240 V, 50/60 Hz
Nominal power:
220-240 V: Incandescent, HV, electronic/wounded transformators: 2x 350 W/VA
220-240 V: LED lamp in RC mode: 2x 200 W, max. 1.3 A
220-240 V: LED lamp in RL mode: 2x 60 W, max. 0.5 A
110-127 V: Incandescent, HV, electronic/wounded transformators: 2x 200 W/VA
110-127 V: LED lamp in RC mode: 2x 135 W, max. 1.5 A
110-127 V: LED lamp in RL mode: 2x 54 W, max. 0.6 A
Device width: 4 modules = approx. 72 mm
To be completed with: SpaceLogic KNX Universal Dimming Master MTN6710-0102
Accessories: SpaceLogic KNX Cable Link S MTN6941-0001, SpaceLogic KNX Cable Link L MTN6941-0002
Contents: With Module Link.