MTN6700-0308 Schneider SpaceLogic KNX Switch Actuator REG-K/8×250/20 with manual mode
MTN6700-0308 Description
The actuator is used for switching 8 loads, or can be used as a 8-channel heating acutator for valves (without heating controller).
A green LED indicates readiness for operation after the application has been loaded.
For mounting on DIN rails TH35 according to EN61715. The bus connection is made via a bus connection terminal.
General KNX software functions: Live signal, enabling safety priority function, central control of switching/curtains function, sending delay after bus voltage recovery
MTN6700-0308 Switching actuator functions:
Preset, Logic, Scene, Threshold, Safety, Forced, Locking, Central, Time function for each channel including delay, flashing and staircase timer, relay state after bus voltage failure/recovery/ETS download, object value of the Switch object after voltage recovery, status feedback for each channel
MTN6700-0308 Heating actuator functions：
PWM cycle time for continuous, 1 bit/1 byte control telegram, Valve protection, Safety, Locking, Forced, Cyclic surveillance, Operation as NC/NO, Valve position after bus voltage failure or recovery, Contact response value when contact is opened or closed
MTN6700-0308 Specifications：
Version : white
Art. no :MTN6700-0308
Range of product:KNX
Product or component type: Switch actuator
Operating mode: Manual
Bus type: KNX
Modular device additional info: Connectable with different phases
Number of contacts: 8
Mounting support: DIN rail
Rated current: 6.5 mA, max. 19 mA/24 V
KNX power consumption: < 600 mW
Nominal voltage: AC 250 V, 50/60 Hz
Nominal power for each contact:
AC1 20 A operation (cos φ = 0.8) accord. with IEC 60947-4-1
AC3 16 A operation (cos φ = 0.45) accord. with IEC 60947-4-1
Incandescent lamp: 4000 W
Fluorescent lamp: 4000 W
Electronic transformer for extra low voltage lamps (e.g. halogen lamps): 3000 W
Iron core transformer for extra low voltage lamps (e.g. halogen lamps): 2200 W
LED lamp: 750 W, cos φ ≥ 0.6
Capacitive loads: 20 AX, 200 μF
Motors: 4000 VA, cos φ ≥ 0.6
Minimum switching current: 100 mA/12 V AC
Connection port KNX: Bus connection terminal
Connection port Mains: Screw terminal blocks, 1×8-gang
Relay data：
Switching frequency at rated load: for one channel: 60 operations/min
for all channels: 30 operations/min
Mechanical service life: >1×1000000
Inrush current: 500 A/2 ms
Protection type: IP20
Protection class: II
Insulation category: Overvoltage category III, pollution degree 2
Environmental conditions：
Operating temperature: -5…+45 °C
Storage temperature: -25 …+55 °C
Transport temperature: -25 …+70°C
Maximum humidity: 93 %, no condensation
Installation height: As high as 2000 m above sea level
Product dimensions (WxHxD): 4 channels: 144 x 90 x 64 mm
Weight:433.000 g
Packing Units:
Unit Type of Package 1:PCE
Number of Units in Package 1:1
Package 1 Height:8.300 cm
Package 1 Width:13.000 cm
Package 1 Length:28.000 cm
Package 1 Weight:626.00 g
Contents: With bus connecting terminal and cable cover
