MTN6503-0201 Schneider Energy Management SpaceLogic KNX Metering Gateway Modbus REG-K
MTN6503-0201 Schneider Energy Management Introduction
The KNX Metering Gateway Modbus REG-K is a gateway between a Modbus installation and the KNX bus.
The device transmits measured power and consumption values from connected Modbus power counters to the KNX bus. These power counter data can be used to evaluate, visualise, or reduce the power consumption in your KNX installation.
Up to ten Modbus counters can be connected to the gateway in parallel with RTU transfer protocol. These counters send data to the KNX via the gateway. The gateway always works in master mode, and the connected Modbus devices work in slave mode. Communication from KNX to the Modbus is not possible. The ETS application has pre-programmed templates for 17 different Schneider Electric models of Modbus counters. In ETS, a corresponding template can be assigned to each connected Modbus counter. The corresponding Modbus registers are then automatically assigned to the communication objects on the KNX side.
For Modbus devices without a template, up to 40 Modbus registers can be directly assigned to the communication objects on the KNX side.
The device is supplied with power via the KNX bus.
With integrated bus coupler. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal.
With screw terminals.
MTN6503-0201 KNX software functions:
Modbus communication settings (baud rate, parity, delays). Selection of pre-programmed templates for 17 Modbus counters with detection of: voltage (phase 1-3), current (phase 1-3), frequency, power factor, active power, reactive power, apparent power, active energy, reactive energy, 6 binary counters, 2 analogue inputs (using Smart Interface Module SIM10M template). In addition to the template, direct access to Modbus registers and manual assignment of the register values to communication objects are possible. Diagnostic function: active and passive evaluation of errors in the Modbus installation. All values can be reset by a reset object.
MTN6503-0201 Energy Management Specifications
Version : white
Art. no : MTN6503-0201
Range of product:KNX
Range of product：SpaceLogic KNX
Range：SpaceLogic KNX
Product or component type：Metering gateway
Bus type：KNX/Modbus
Market segment：Small commercial
Complementary:
Communication of data：Energy and power metering
Product destination：PM9C universal meter
PM210 universal meter
PM710 universal meter
PM750 universal meter
PM810 universal meter
PM820 universal meter
PM850 universal meter
PM870 universal meter
PM1200 universal meter
PM6200 universal meter
PM3250 universal meter
PM3255 universal meter
IEM3150 energy counter
IEM3155 energy counter
IEM3250 energy counter
IEM3255 energy counter
SIM10M smart interface module
Software type：Updateable software
Communication port protocol：KNX/Modbus
Connections – terminals：Modbus: screw terminals
KNX: bus terminal
total number of 18 mm modules：2.5
Device width: 2.5 modules = approx. 44 mm
Mounting support：DIN rail
[Ue] rated operational voltage：24 V
Environment:
IP degree of protection：IP20
Packing Units:
Unit Type of Package 1：PCE
Number of Units in Package 1：1
Package 1 Height：8.0 cm
Package 1 Width：12.4 cm
Package 1 Length：15.8 cm
Package 1 Weight：251.0 g
