MTN644592 Schneider SpaceLogic KNX Binary input REG-K/8×10 Introduction：
KNX binary input REG-K/8×10. For connecting eight conventional push-buttons or floating contacts to the KNX. Internally generates a signal voltage SELV, electrically isolated from the bus. With integrated bus coupler and plug-in screw terminals. The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded. For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal. a data rail is not necessary.
MTN644592 KNX Binary input software functions:
Switching, dimming or blind control via 1 or 2 inputs. Positioning values for blind control (8-bit). Pulse edges with 1-, 2-, 4-, or 8-bit telegrams. Differentiation between short/long operation. Initialisation telegram. Cyclical sending. Pulse edges with 2-byte telegrams. 8-bit linear regulator. Disable function. Break/make contact. Debounce time.
MTN644592 KNX Binary input Specifications：
Version : light grey
Art. no : MTN644592
Range of product : KNX
Supply from KNX: DC 24 V / max.18 mA
Insulation voltage: AC 4 kV bus/inputs
Inputs
Contact voltage: max. 10 V (SELV)
Contact current: max. 2 mA, pulsating
Transfer resistance (between contact and cable): max. 500Ω when contact closed,
min. 50 kΩ when contact open
Permitted cable length: max. 50 m
Ambient temperature：
Operation: -5 °C to +45 °C
Storage: -25 °C to +55 °C
Transport: -25 °C to +70 °C
Max. humidity: 93 % relative humidity, no moisture condensation
Environment: The device is designed for use at a height of up to 2000 m above sea level (MSL).
Connections：
Inputs, outputs: Screw terminals
Single-core: 1.5 mm² to 2.5 mm²
Finely stranded (with core end sleeve): 1.5 mm² to 2.5 mm²
KNX: Bus connecting terminal
Dimensions
Height x width x depth: 90 x 72 x 65 mm
Device width: 4modules = approx. 72 mm
