MTN630860 Schneider KNX ARGUS Presence detection indoors Introduction：
If KNX ARGUS Presence detects smaller movements in the room, data telegrams are transmitted via KNX to control the lighting, blind or heating at the same time.
When the lighting is controlled by brightness dependent movement detection, the device constantly monitors the brightness in the room. If sufficient natural light is at hand, the device switches the artificial light off even if a person is present. The overshoot time can be adjusted using the ETS.
With integrated bus coupling unit. For ceiling mounting in a size 60 mounting box, optimal installation at 2.5 m. Can also be mounted to ceilings using the surface mounting housing for ARGUS Presence.
MTN630860 Schneider Presence detection indoors Description：
Schneider Electric KNX presence detector MTN630860 is in color aluminium with a time delay of 0…1 s. Its matching mounting box can be recessed into the surface of the wall with flush type. The protection type is creep zone protection, improving safety level. The duty cycle of this device is 15300 minutes. With the maximum distance detected to be 14 m when you move. Besides it is halogen free halogen free, which is good for your health. What’s more, this device is qualified as a green premium product, with minimal use of hazardous substances. And it is mercury free KNX combines all main building functions like lighting, heating, air-conditioning or shading into one intelligent system, resulting in considerable energy savings, and save installation time.
KNX software functions:
Five movement/presence blocks: up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes.
Normal operation, master, slave, monitoring, safety pause, disable function. Four movement sensors: the sensitivity and range can be set separately for each sensor. Self adjusting staircase timer. Actual brightness value: can be detected via the internal and/or an external light sensor. Actual value correction.
MTN630860 KNX Presence detection Specifications：
Colour tint：Aluminium
Art. no : MTN630860
Range of product : KNX
Product or component type：Presence detector
Complementary:
Device presentation：Complete product
Number of levels: 6
Protection type：Creep zone protection
Number of movement sensors: 4, separately adjustable
Duty cycle：15300 minutes
Number of zones: 136 with 544 switching segments
Time delay range：0…1 s (switch-on)
Detection face：Lateral: 7 m
Detection angle：360° horizontal
Device mounting：Flush
Mounting height：2.5 m
Packing Units：
Unit Type of Package 1：PCE
Number of Units in Package 1：1
Package 1 Height：18.0 cm
Package 1 Width：10.0 cm
Package 1 Length：14.2 cm
Package 1 Weight：193.0 g
