MTN682291 Schneider SpaceLogic KNX Analogue actuator REG-K/4-gang Introduction：
Different analogue variables (e.g. servomotors). The actuator has four analogue outputs. For use in connection with the analogue actuator module REG/4-gang, 8 analogue outputs are provided. Connections are made using the sub-bus.
With continuity checking of the current outputs.
For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal.
MTN682291 KNX Analogue actuator Specifications：
Version : light grey
Art. no : MTN682291
Range of product : KNX
Current signals: 0 … 20 mA, 4 … 20 mA
Voltage signals: 0 … 1 V, 0.. 10 V
Continuity checking: 4 … 20 mA
Outputs: DC 24 V, 100 mA (total)
Device width: 4 modules = approx.
Auxiliary voltage: AC 24 V ±10 %
Current consumption: max. 308 mA
KNX voltage: DC 24 V (+8 V / -3 V)
KNX power consumption: typ. 150 mW
Ambient temperature: -5 °C to +45 °C
Storage/transport temp.: -25 °C to +70 °C
Humidity Environment/storage/transport: max. 93% relative humidity,no condensation
Connections:
Outputs, power supply: Screw terminals
Single-core: 0.5 mm² to 4 mm²
Finely stranded
(without core end sleeve): 0.34 mm² to 4 mm²
Finely stranded
(with core end sleeve): 0.14 mm² to 2.5 mm²
KNX: Connecting and branch terminal
Analogue actuator module: 6-pin system plug
Analogue outputs：
Number: 4
Ranges: DC 0 to 1 V,
DC 0 to 10 V,
DC 0 to 20 mA ,
DC 4 to 20 mA
Voltage measurement impedance: > 1 kΩ
Current measurement impedance: < 500 Ω
Analogue actuator module：
power supply: DC 24 V via system bus max. 80 mA
Type of protection: IP 20 in accordance with EN 60529
Device width: 4 TE = approx. 72 mm
