MTN646704 Schneider SpaceLogic KNX Blind actuator REG-K/4x/6 with manual mode
MTN646704 Schneider 4-channel blind actuator Description：
The blind actuator REG-K/4x/6 (referred to below as the actuator) can control four blind/roller shutter drives with limit switch independently of one another.
The actuator has a bus coupler. It is installed on a DIN rail, with the bus connection made via a bus connecting terminal. A data rail is not required.
For independent control of 4 blind/roller shutter drives. With integrated bus coupler and plug-in screw terminals.
A green LED indicates readiness for operation after the application has been loaded.
For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal.
MTN649804 KNX Blind Extension software functions:
Blind functions: Blind type. Running time. Idle time. Step interval. Weather alarms. 8-bit positioning for height and slats. Scenes. Automatic function. Differentiated status and feedback functions.
MTN646704 KNX Blind Extension Specifications：
Version : light grey
Art. no : MTN646704
Range of product : KNX
Supply from KNX: DC 24 V, max. 12.5 mA
Nominal voltage: AC 230 V
Nominal current: 6 A, inductive cos ϕ = 0.6
Motor load: max. 1000 W at AC 230 V
Switching frequency: max. 15 times per minute at nominal load
Ambient temperature:
Operation: -5 to +45 °C
Storage: -25 to +55 °C
Transport: -25 to +70 °C
Environment: can be used at up to2000 m above sea level(MSL)
Max. humidity: 93 %, no moisture condensation
KNX connection: two 1 mm pins for bus connecting terminal
External cable connection: per channel one plug-in 4- gang screw terminal for max. 2.5 mm mm 2
Device width: 4 depth units = approx.72 mm
