MTN630960 Schneider KNX ARGUS Presence with light control and IR receiver
MTN630960 Schneider Presence detection indoors Introduction：
If KNX ARGUS Presence detects smaller movements in the room, data telegrams are transmitted via KNX to control the lighting, blind or heating at the same time.
When the lighting is controlled by brightness-dependent movement detection, the device constantly monitors the brightness in the room. If sufficient natural light is at hand, the device switches the artificial light off even if a person is present. The overshoot time can be adjusted using the ETS.
Light control enables the required brightness in a room to be achieved permanently. Dimming and the optional use of a second lighting group maintains a constant brightness.
Individual ARGUS Presence configurations can be changed or other KNX devices can be controlled remotely using the IR receiver.
With integrated bus coupling unit. For ceiling mounting in a size 60 mounting box, optimal installation at 2.5 m. Can also be mounted to ceilings using the surface mounting housing for ARGUS Presence.
MTN630960 KNX software functions:
Five movement/presence blocks: up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes.
An additional light control block: brightness can be maintained constant by dimming and an additional adjustable level.
IR receiver function. IR configuration: setting the brightness threshold, staircase timer factors or range.
Normal operation, master, slave, monitoring, safety pause, disable function. Four movement sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase timer. Actual brightness value: can be detected via the internal and/or an external light sensor. Actual value correction.
MTN630960 KNX Presence detection Specifications：
Colour tint：Aluminium
Art. no : MTN630960
Range of product : KNX
Product or component type：Presence detector
Complementary:
Device presentation：Complete product
Number of channels：6
Protection type：Creep zone protection
Type of setting：Light sensitivity adjustable
Duty cycle：15300 minutes
Time delay range：0…1 s (switch-on)
Detection face：Lateral: 7 m
Detection angle：360° horizontal
Device mounting：Flush
Mounting height：2.5 m
Packing Units：
Unit Type of Package 1：PCE
Number of Units in Package 1：1
Package 1 Height：10.0 cm
Package 1 Width：14.3 cm
Package 1 Length：18.2 cm
Package 1 Weight：184.0 g
