MTN646991 Schneider SpaceLogic KNX Control unit 0-10 V REG-K/3-gang with manual mode
MTN646991 Dimmer actuator Description：
For connecting devices with 0-10 V interface to KNX. With integrated bus coupler and screw terminals (230 V) or plug-in screw terminals (0-10 V). Each individual 230 V switch output can be operated manually with a manual switch.
For installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal.
MTN646991 KNX software functions:
Different dimming curves and dimming speeds, the same dimming time, memory function, ON/OFF delay, staircase time function with/without manual OFF function, scenes (up to eight stored brightness values can be retrieved), central function, logic operation or priority control, blocking function, status feedback, behaviour on bus voltage recovery.
MTN646991 KNX Specifications：
Version : light grey
Art. no : MTN646991
Range of product : KNX
Switch contact: for switching the electronic ballasts/transformers
Nominal voltage: AC 230 V, 50-60 Hz
Nominal current: 16 A, cosϕ = 0.6
Switching capacity: AC 230 V, 3600 W, cosϕ = 1
Capacitive load: AC 230 V, 16 A, 200 µF
Incandescent lamps: AC 230 V, max. 3600 W
Halogen lamps: AC 230 V, max. 2500 W
Fluorescent lamps:
AC 230 V, max. 3600 VA, uncompensated
AC 230 V, max. 2500 VA, with parallel compensation
LV- halogen lamps with wound transformer: max. 2000 VA
0-10 V interface: 0.12-100 mA
Voltage range: DC 0-10 V
Device width: 4 HP = approx. 72 mm
